If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
The nano aluminum nitride is produced by aerosol ablation. It has high purity, small particles, a high specific surface area, high surface activity, and large specific surface. The powder that has been surface modified will not undergo hydrolysis and have a very low oxygen content. Insulation and thermal conductivity are very evident (0.01%). The viscosity does not show up when used in polymer materials, but it is the most effective high thermal conductivity insulation filler. The properties Nano Aluminium Nitroride
The resistance is 1015, it can withstand a high temperature of 1400 degrees, and has a small thermal expansion coefficient. The resistivity is 1015. It can also withstand high temperatures of up to 1400 degrees. It can significantly improve the thermal conduction of silicone rubber and polymers. It is a thermal shock resistant material.
It is also good for injection molding.
A application of nano aluminium nitrogen
1. The materials can be used in the manufacture of electronic devices, optic devices, integrated circuits, high temperature crucibles, and high-temperature adhesives. Good application prospects. Can replace the micron aluminum alloy currently imported.
2. Thermally-conductive silica and thermally-conductive epoxy resins: Ultra-high-thermal-conductive silica prepared with nano-aluminum nitride is a silica-based gel that has good thermal conductivity. It has a good electrical insulation, a large operating temperature range (80-250 degrees), a lower consistency and a good construction performance. These include the space between the CPU radiator, high power transistors, thyristors components, diodes and the heat transfer material at the slits that are in contact with substrate. Nano thermal paste fills the gap between IC and heat sink. It also increases the area of contact between the two. This will improve heat dissipation.
3. Nano lubricating and anti-wear agent. Modified nano aluminum-nitride ceramics added to the nanoceramic engine oils act on metal surfaces inside the engine. This lubricating and anti-wear agent is activated when high temperatures and pressure are applied. The film layer has an isolation effect that prevents friction from affecting the other parts. The nano-ceramic particle changes the friction between friction pairs to a rolling friction. The engine is protected from wear by reducing friction and friction between moving components to near zero. It can increase anti-wear by more 350% by improving lubrication. By doing so, it reduces friction by more 80 % and increases the antiwear ability. Only 1/1000 to 2/10000.
4. Application in high-thermal conductivity plastics. The modified nano aluminum powder can significantly improve the conductivity of plastics. Thermal conductivity in plastics can be improved by 10-30% using the experimental product. The main applications are PVC, polyurethane and PA plastics.
5.Other applications: Nano aluminum-nitride ceramics can be used as crucibles to melt non-ferrous metals or semiconductor materials such as gallium arsenide. It is also suitable for thermocouple protection tubes and other high temperature insulating components.
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacture with over 12 year’s experience in supplying super-high-quality chemicals and nanomaterials. Aluminum nitride is produced by our company with high purity and fine particle size. Contact us if you need to.
The resistance is 1015, it can withstand a high temperature of 1400 degrees, and has a small thermal expansion coefficient. The resistivity is 1015. It can also withstand high temperatures of up to 1400 degrees. It can significantly improve the thermal conduction of silicone rubber and polymers. It is a thermal shock resistant material.
It is also good for injection molding.
A application of nano aluminium nitrogen
1. The materials can be used in the manufacture of electronic devices, optic devices, integrated circuits, high temperature crucibles, and high-temperature adhesives. Good application prospects. Can replace the micron aluminum alloy currently imported.
2. Thermally-conductive silica and thermally-conductive epoxy resins: Ultra-high-thermal-conductive silica prepared with nano-aluminum nitride is a silica-based gel that has good thermal conductivity. It has a good electrical insulation, a large operating temperature range (80-250 degrees), a lower consistency and a good construction performance. These include the space between the CPU radiator, high power transistors, thyristors components, diodes and the heat transfer material at the slits that are in contact with substrate. Nano thermal paste fills the gap between IC and heat sink. It also increases the area of contact between the two. This will improve heat dissipation.
3. Nano lubricating and anti-wear agent. Modified nano aluminum-nitride ceramics added to the nanoceramic engine oils act on metal surfaces inside the engine. This lubricating and anti-wear agent is activated when high temperatures and pressure are applied. The film layer has an isolation effect that prevents friction from affecting the other parts. The nano-ceramic particle changes the friction between friction pairs to a rolling friction. The engine is protected from wear by reducing friction and friction between moving components to near zero. It can increase anti-wear by more 350% by improving lubrication. By doing so, it reduces friction by more 80 % and increases the antiwear ability. Only 1/1000 to 2/10000.
4. Application in high-thermal conductivity plastics. The modified nano aluminum powder can significantly improve the conductivity of plastics. Thermal conductivity in plastics can be improved by 10-30% using the experimental product. The main applications are PVC, polyurethane and PA plastics.
5.Other applications: Nano aluminum-nitride ceramics can be used as crucibles to melt non-ferrous metals or semiconductor materials such as gallium arsenide. It is also suitable for thermocouple protection tubes and other high temperature insulating components.
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacture with over 12 year’s experience in supplying super-high-quality chemicals and nanomaterials. Aluminum nitride is produced by our company with high purity and fine particle size. Contact us if you need to.