If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Introduction to Molybdenum Silicide MoSi2 Pulp
Molybdenum silicide
In 1906, it was discovered. In different circumstances, silicon and molybdenum may form molybdenum trisilicide, molybdenum pentasilicate, and molybdenum silicate (MoSi2). Molybdenum trisilicide (MoSi2) – a Dalton type intermetallic compound – is the most important. The excellent high-temperature essential qualities of the atomic combination found in its crystal structure show coexistence between metal bonds and covalent bond.
Molybdenum Disilicide It is an organic compound. The chemical formula for MoSi2 is gray metal solid. Although insoluble in most acids it is soluble in nitric and hydrofluoric acids. Both types of atoms have the same radii as well as electronegativity. This is similar to ceramic and metal. Molybdenum Disilicide The surface is electrically conductive and forms a passivation layer made of silicon dioxide at high temperatures. This prevents further oxidation.
It can be used in high-temperature, oxidation-resistant coatings, electric heating elements and integrated electrode films, as well as structural materials, composite reinforcements, wear-resistant materials and other fields.
Molybdenum silicicide MoSi2 MoPi2 Powder Physicochemical properties
MoSi2 refers to a type of intermediate phase that has the highest silicon content in Mo-Si’s binary alloy system. This is a Dalton-type intermetallic composition with a fixed structure. It has both the characteristics of a metal and a ceramic and is an excellent high-temperature materials. High-temperature oxidation resistance and oxidation resistant temperature up to 1600 with SiC equivalent; Moderate densities (6.24g/cm3). Low thermal expansion coefficient (8.10-6K-1); Excellent electric conductivity. Higher brittleness and ductile transition temperatures (1000), below the hardbrittleness of ceramics. It is a metal-like soft material above 1000. MoSi2 is used primarily as heating elements, integrated Circuits, high temperature oxidation-resistant coatings, and high-temperature structure material.
MoSi2 consists of silicon and molybdenum bonded with metal bonds. While silicon and silicon can be bonded by covalent bond, silicon and molybdenum are bonded via metal bonds. Molybdenum disilicide can be described as a gray tetragonal stone. It is insoluble with most mineral acids (including aqua-roya), but is soluble and can be used to heat an oxidation atmosphere at high temperatures (1700).
An oxidizing atmosphere forms a protective layer on the surface quartz glass (SiO2) that has been heated to high temperatures. This prevents continuous oxidation. SiO2 protective layer is formed when the heating element’s temperature is greater than 1700. This protects the SiO2 from being oxidized. Its surface-extending ability causes it to lose its protective properties. The protective film is formed again when the element is continuously exposed to the oxidant. Due to the high oxidation at low temperatures, this element can’t be used for extended periods of time at 400-700.
Molybdenum Siicide MoSi2 Powder Applications
MoSi2 can be found in many heating elements. Heating elements with molybdenum diilicide Can be used at temperatures as high as 1800°C in electric furnaces for production environments in glass, steel and ceramics. Although they are very brittle, these components can still be operated at high power and without aging. Their resistivity also does not decrease with time.
Main supplier of Molybdenum Silicide MoSi2 Pulp
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and nanomaterials. They have over 12 years experience in producing super high-quality chemicals.
High-quality products are what you want molybdenum silicide, MoSi2 Powder Please feel free and contact us to send an inquiry. (brad@ihpa.net)
Molybdenum Disilicide It is an organic compound. The chemical formula for MoSi2 is gray metal solid. Although insoluble in most acids it is soluble in nitric and hydrofluoric acids. Both types of atoms have the same radii as well as electronegativity. This is similar to ceramic and metal. Molybdenum Disilicide The surface is electrically conductive and forms a passivation layer made of silicon dioxide at high temperatures. This prevents further oxidation.
It can be used in high-temperature, oxidation-resistant coatings, electric heating elements and integrated electrode films, as well as structural materials, composite reinforcements, wear-resistant materials and other fields.
Molybdenum silicicide MoSi2 MoPi2 Powder Physicochemical properties
MoSi2 refers to a type of intermediate phase that has the highest silicon content in Mo-Si’s binary alloy system. This is a Dalton-type intermetallic composition with a fixed structure. It has both the characteristics of a metal and a ceramic and is an excellent high-temperature materials. High-temperature oxidation resistance and oxidation resistant temperature up to 1600 with SiC equivalent; Moderate densities (6.24g/cm3). Low thermal expansion coefficient (8.10-6K-1); Excellent electric conductivity. Higher brittleness and ductile transition temperatures (1000), below the hardbrittleness of ceramics. It is a metal-like soft material above 1000. MoSi2 is used primarily as heating elements, integrated Circuits, high temperature oxidation-resistant coatings, and high-temperature structure material.
MoSi2 consists of silicon and molybdenum bonded with metal bonds. While silicon and silicon can be bonded by covalent bond, silicon and molybdenum are bonded via metal bonds. Molybdenum disilicide can be described as a gray tetragonal stone. It is insoluble with most mineral acids (including aqua-roya), but is soluble and can be used to heat an oxidation atmosphere at high temperatures (1700).
An oxidizing atmosphere forms a protective layer on the surface quartz glass (SiO2) that has been heated to high temperatures. This prevents continuous oxidation. SiO2 protective layer is formed when the heating element’s temperature is greater than 1700. This protects the SiO2 from being oxidized. Its surface-extending ability causes it to lose its protective properties. The protective film is formed again when the element is continuously exposed to the oxidant. Due to the high oxidation at low temperatures, this element can’t be used for extended periods of time at 400-700.
| Molybdenum Silicide MoSi2 Powder Properties | |
| Other names | molybdenum disilicide (MoSi2 Powder) |
| No. | 12136-78-6 |
| Formula compound | MoSi2 |
| Molecular Weight | 152.11 |
| Appearance | From gray to black powder |
| Melting Point | 1900-2050 degC |
| Boiling Point | N/A |
| Density | 6.23-6.31g/cm3 |
| Solubility of H2O | N/A |
| Exact Mass | 153.859261 |
Molybdenum Siliconicide MoSi2 MoSi2 powder CAS 12136-878-6
Molybdenum Siicide MoSi2 Powder Applications
MoSi2 can be found in many heating elements. Heating elements with molybdenum diilicide Can be used at temperatures as high as 1800°C in electric furnaces for production environments in glass, steel and ceramics. Although they are very brittle, these components can still be operated at high power and without aging. Their resistivity also does not decrease with time.
Main supplier of Molybdenum Silicide MoSi2 Pulp
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemicals and nanomaterials. They have over 12 years experience in producing super high-quality chemicals.
High-quality products are what you want molybdenum silicide, MoSi2 Powder Please feel free and contact us to send an inquiry. (brad@ihpa.net)